Funded projects

Introduction of new technologies at Pandan Kft.

GINOP Plusz- 1.4.5-25

Programme: GINOP Plusz-1.4.5-25 National Champions Loan Programme

Beneficiary: Pandan Kft.

Objective: Introduction of new technology, capacity expansion, green energy generation and digital transformation at Pandan Kft. to increase competitiveness.

Amount of non-repayable grant: 76 788 696 HUF

Amount of repayable loan: 179 173 624 HUF

Planned project completion date: 31 October 2026

Detailed description: Within the project, Pandan Kft. expanded its plant buildings with a new hall and a forklift corridor to achieve its goals of efficient operation and capacity growth. As part of the capital investment, we purchased state-of-the-art printing cylinders and anilox rollers for our new printing press, as well as an electronic inspection system that modernises our lamination technology. As part of the green transition, we are installing a 121 kW solar power system and introducing a new enterprise resource planning (ERP) system.

The project is implemented with the support of the European Union.

Demján Sándor 1+1 SME Investment Stimulus Grant Programme

Programme: Demján Sándor 1+1 SME Investment Stimulus Grant Programme

Beneficiary: Pandan Kft.

Objective: Purchase of a new printing press, IT development, renewable energy development and corporate identity renewal..

Amount of non-repayable grant: 200 000 000 HUF

Planned project completion date: 31 October 2026

Detailed description: Within the project, Pandan Kft. purchased a new Windmöller & Hölscher Alphaflex printing press, which significantly increases the company’s printing capacity, efficiency and print quality. In addition, we are commissioning a new solar collector, expanding our IT capabilities and developing a new website and corporate identity.

Building energy efficiency upgrade at Pandan Kft.

GINOP-4.1.5-22-2022-00036

Name of beneficiary: PANDAN Műanyagfeldolgozó és Környezettechnikai Korlátolt Felelősségű Társaság (PANDAN Plastics Processing and Environmental Technology Ltd.)

Project ID: GINOP-4.1.5-22-2022-00036

Project title: Building energy efficiency upgrade at Pandan Kft.

Total eligible project cost: 84 284 352 HUF

Contracted grant amount: 75 855 916 HUF

Grant intensity: 90 %

Project start date: 2022.08.01.

Project completion date: 2023.06.29.

Project content:

Complete modernisation of heating and/or domestic hot water systems, installation of an A++ air-to-water heat pump system, replacement of radiators.
Modernisation of the old, outdated indoor lighting system, wiring of a new lighting system and installation of light fittings.
Installation of 150 mm polystyrene foam board insulation on the brick walls of the office building.
Installation of 150 mm horizontal polystyrene foam board insulation in the attic.
Installation of 100 mm PUR sandwich panels on the western, southern and eastern sides of the production hall.
Removal of the trapezoidal steel sheet cladding of the steel-frame hall’s roof and its replacement with new 100 mm steel-faced PUR foam sandwich panel insulation.
Modernisation of aluminium doors and windows.
Installation of PVC doors and windows.
Installation of a sectional industrial door.
Installation of a 45.65 kWp solar power system on the steel roof structure of the production hall.

Workplace training at Pandan Kft.

GINOP-6.1.6-17-2018-00537

Name of applicant: PANDAN Műanyagfeldolgozó és Környezettechnikai Kft.

Project ID: GINOP-6.1.6-17-2018-00537

Project title: Workplace training at Pandan Kft.

Contracted grant amount: 33 370 019 HUF

Grant intensity: 100 %

Physical completion of the project: 2020.08.12.

Project content:

We planned 18 training courses in our project, but due to the COVID-19 pandemic we were ultimately able to deliver 17, as follows:

  • Improving the effectiveness of cooperation (20 hours): 15 of 15 participants obtained a certificate
  • Improving the effectiveness of cooperation (20 hours): 11 of 15 participants obtained a certificate
  • Improving the effectiveness of cooperation (20 hours): 11 of 15 participants obtained a certificate
  • ICT skills (20 hours): 10 of 10 participants obtained a certificate
  • Lean is not just for companies! – Lean philosophy in everyday life (40 hours): 16 of 16 participants obtained a certificate
  • Lean is not just for companies! – Lean philosophy in everyday life (40 hours): 15 of 15 participants obtained a certificate
  • Lean is not just for companies! – Lean philosophy in everyday life (40 hours): 15 of 15 participants obtained a certificate
  • Lean is not just for companies! – Lean philosophy in everyday life (40 hours): 9 of 9 participants obtained a certificate
  • Modern practice: improving adaptability (20 hours): 10 of 10 participants obtained a certificate
  • Modern practice: improving adaptability (20 hours): 10 of 10 participants obtained a certificate
  • Modern practice: improving adaptability (20 hours): 10 of 10 participants obtained a certificate
  • Modern practice: improving adaptability (20 hours): 10 of 10 participants obtained a certificate
  • Modern practice: effective leadership. 9 of 9 participants obtained a certificate
  • Construction and material handling machine operator: 5 of 5 participants obtained a certificate
  • Social security and payroll administrator training: 3 of 3 participants obtained a certificate
  • Logistics and freight forwarding administrator: 1 of 1 participant obtained a certificate.
  • INDUSTRY 4.0 – in-house training: 37 of 37 participants obtained a certificate

We achieved – and in every case exceeded – the committed indicator targets.

During the 18-month implementation period, successful delivery was supported by a project manager, a financial manager and a professional implementation lead.

Detailed project description:
http://uniosforrasok.hu/pandan

Purchase of a distillation unit

GINOP-2.1.8-17-2017-00065

ginop_2_1_8_17_2017_00065_o-scaled

Project title:                                       PURCHASE OF A DISTILLATION UNIT BY PANDAN KFT

Project ID:                  GINOP-2.1.8-17-2017-00065

Name of beneficiary:                    PANDAN MŰANYAGFELDOLGOZÓ ÉS KÖRNYEZETTECHNIKAI KFT

Contracted grant amount:       14.999.970 HUF

Grant intensity:                         36.78%

Project completion date          2018.10.16.

Project content:

Flexo colour printing is a widespread technology in the printing industry, in which plastic films are printed with solvent-based inks.

Design changes inevitably require the printing units to be washed with solvent.

The solvent becomes contaminated with ink residue, and each wash produces 50–200 litres of contaminated liquid.

Environmental and economic requirements call for this contaminated liquid to be regenerated.

 The process used is distillation, in which liquid components with similar boiling points are heated, evaporated and then condensed.

The unit purchased under the grant implements this technology using steam heating. Capacity: approx. 700–800 l per shift.

With this unit we can regenerate the solvent generated during press operation with the lowest possible residual waste content, so that it can be fed back into the process.

Less residual solvent remains, and thanks to the unit’s higher efficiency, significantly less hazardous waste needs to be disposed of – substantially reducing both the amount of waste and the environmental impact.